Last Updated on

What it is?

The MYC-C335X-GW CPU Module / SoM is a newly-released product by MYIR, It is powered by TI’s AM335x ARM Cortex-A8 Processor (using TI am3354 on board by default), which are capable of running at Up to 1GHz.

The SoM has a very compact size measuring only 50mm by 40mm, with configurations onboard including 256/512MB DDR3L, 256MB Nand Flash/4GB eMMC, 256Kbit EEPROM, a Power Management IC (TPS65217C), on the back of the SoM, it has two 0.8mm pitch 80-pin Board-to-Board Expansion Connectors, which bring out multiple signals.

The SoM runs Linux 4.14.67, capable of running in -40 to +85 Celsius extended temperature operation. Benefiting from the features (PowerVR™ SGX530 for 2D and 3D graphics acceleration) of the TI AM335x processors, the MYC-C335X-GW is an ideal solution for industrial gate-way, high-end HMI and other embedded applications.

MYC-C335X-GW Top-view

MYC-C335X-GW Bottom-view

Peripherals and Signals Routed to Pins

  • Power Management IC (TPS65217C)
  • Two 0.8mm pitch 80-pin expansion connectors can carry out interfaces below
    – 2 x RGMII
    – 2 x USB2.0 Host or 2 x USB2.0 Device
    – 6 x UART
    – 3 x I2C
    – 2 x CAN
    – 2 x SPI
    – 7 x ADC
    – 1 x SAI
    – 1 x RGB (supports RGB888 at up to 2048 x 2048 pixels resolution)
    – 2 x SDIO
    – 1 x JTAG
    – 97 x GPIOs

 

See alsoMYD-Y6ULX Development Board with on Board WiFi

 

What’re the features of the MYD-C335X-GW Development Board

MYD-C335X-GW Development Board

MYIR provides a development board MYD-C335X-GW for the CPU Module, It consists of the MYC-C335X-GW (as a controller board) and a carrier board. The development board is a complete development platform for both evaluation and application development purposes based on TI AM335x processors.

The size of the carrier board is 112.57mm x 132mm, Multiple peripherals are routed out such as RS232, RS485USB 2.0 Host2 x Ethernet (it could be used as 1 x Ethernet and 1 x SFP interface)TF card slot, a WiFi/Bluetooth module, LVDS, LCD and JTAG for debug.

The board is designed with a Mini PCIe interface, USB based 4G LTE modules are available to work with it. Besides, MYIR also provides optional l Camera module and LCD modules for users to work with MYD-C335X-GW.

The resources on the carrier board are listed as below table.

ItemDescription
Serial ports1 x Debug serial port (TTL)

1 x RS485 serial port (with isolation)

1 x 3-wire RS232 serial port (with isolation)

USB1 x USB2.0 Host port
Communication1 x Mini-PCIe interface (for USB based 4G LTE Module)

2 x Gigabit Ethernet interfaces or 1 x Gigabit Ethernet interface and 1 x SFP interface

WiFi/Bluetooth Module

Display1 x RGB LCD interface (J14)

1 x LVDS LCD interface

RTCBattery backed RTC (on the back of the board)
JTAG1 x JTAG interface
ADC1 x ADC interface
Storage1 x TF card slot
Expansion header1 x 2.54mm 2*10-pin male expansion header

Software Features

The MYC-C335X-GW CPU Module is provided with abundant software resources including kernel and driver source code, a MEasy-IOT reference design is also provided by MYIR. The relevant software resources is available for download via an online link.

MEasy-IOT System Structure

 

See alsoMYC-JX8MX CPU Module-High Performance ARM CPU Module

 

Let us know what you think of the AM335x SoM module in the comment section below.

If you like this post subscribe to our YouTube Channel for IoT video Tutorials. You can also find us on Twitter, Facebook, and Instagram for more updates.

and If you have a smart product or service and looking for a perfect audience then submit a guest post at IoTDunia and get to know in the IoT world.